Copyright © 2017 All Rights Reserved.

 3-5 Lenziemill road| Lenziemill Idst Est | Cumbernauld |  North Lanarkshire | G67 2RL

Made by Serif. Contact


Office phone

TEL: 01236 728436

FAX: 01236 728450

Kirk mob: 07787150066

Moira mob: 07870666945

Home Contact Us

There are several heating systems on the market for generating heat in a room. This is only one system

we have highlighted which shows a warmup system where a tile has been fixed in an unheated

conservatory onto a concrete floor using insulation panels, a heating matt and a quality Keope porcelain

tile.The tile fixer can do the whole job and an electrician will do the final wiring to ensure a fully

functional floor meets all standards .

We can supply you with all your needs and you can view the full range at

WARMUP INSULATION BOARD is a water resistant insulated tile backer board made of extruded

polystyrene, faced on both sides with a fibreglass mesh embedded into a thin cement polymer mortar.

These can be used as a structural tile backer board in the floor. It will withstand a load of 30 tonnes

per square metre and is ideal for use with underfloor heating as it pushes the heat into the room, by not

allowing heat to penetrate down into the concrete substrate below. As a wall tile backer board, tiles

can be fixed directly on to the surface without prior preparation and, being totally waterproof, which is

ideal for use in bathrooms or showers.

Warmup Insulation Boards will save you money when used in conjunction with undertile heating by

acting as a very efficient thermal barrier. It reflects the heat upwards into the floor tile instead of

allowing heat to warm up the concrete slab below. By using Warmup Insulation Board you will find that

after switching on your heating, your floor tiles will warm up in about 10-15 minutes. Without insulation

boards it could take anything from 2-3 hours, or more.

Underfloor Heating